You have 0 items in your cart
High-Capacity,Industrial 50000 GPD RO Plant.
This high-capacity 50,000 GPD RO Plant is a heavy-duty water purification system designed for large-scale industrial use. It features a robust, skid-mounted design with multiple high-pressure membrane housings and a vertical multistage centrifugal pump to ensure reliable, high-volume water output. Perfect for factories and industrial facilities requiring consistent, high-purity water.
Description
Introduction:
Ensure a constant supply of high-purity water with our Industrial 50000 GPD RO Plant. Designed for heavy-duty performance, this system effectively removes up to 99% of contaminants, including salts, minerals, and bacteria, making it ideal for large-scale industrial and commercial applications.
Built on a rugged, corrosion-resistant steel frame, this unit is engineered for durability and ease of use. It features high-quality membrane housings and a powerful vertical multistage pump to maintain consistent water pressure and flow.
Key Features of 50000 GPD RO Plant:
-
High Capacity: Produces up to 50,000 gallons of purified water per day.
-
Advanced Filtration: Multi-stage process including sediment pre-filtration and high-performance RO membranes.
-
Smart Control Panel: Features a user-friendly interface for monitoring system status and pressure.
-
Durable Build: Industrial-grade stainless steel piping and a heavy-duty skid-mounted frame.
-
Cost-Efficient: Optimized for low energy consumption and long-lasting membrane life.
Technical Specifications:
| Feature | Details |
| Daily Capacity | 50,000 Gallons Per Day (GPD) |
| Type | Industrial Skid-Mounted |
| Pump Type | High-Pressure Vertical Multistage Pump |
| Frame Material | Powder-Coated Steel / Stainless Steel |
| Inlet Water | Tap, Brackish, or Well Water |
How to Operate:
Operating this industrial-scale system requires following a specific sequence to ensure the longevity of the membranes and the safety of the hardware. Below are the simplified operational steps:
-
Pre-Operation Inspection: Walk around the unit to ensure all plumbing connections are tight and leak-free.
-
Check Power Source: Confirm that the electrical supply matches the requirements for the vertical multistage pump and the control box.
-
Prime the System: Open the raw water inlet valve fully to allow the pre-filter housing to fill with water.
-
Activate Control Panel: Turn the main switch on the control cabinet to the “ON” position.
-
Soft Start the Pump: Engage the high-pressure pump via the control panel to begin forcing water through the membrane housings.
-
Adjust Pressure: Use the control valves to reach the optimal operating pressure as indicated on the gauges.
-
Verify Product Water: Check the flow meters to ensure the ratio of purified water to waste water is correct.
-
Monitor Gauges: Regularly glance at the pressure meters to ensure they stay within the green safety zone.
-
System Flush: Run the manual flush cycle periodically to clear out concentrated salts from the membrane surfaces.
-
Safe Shutdown: Turn off the pump first, then close the inlet valves to prevent water hammer or pressure spikes.
